Audison Prima APK 130 5″ 13cm 75w RMS Car Component Door Speakers

Two way system features AP 1 tweeter and AP 5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.

• AP1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
• AP 1 tweeter with acoustic lens designed to compensate for and fine tune the in-car frequency response anomalies in the 10kHz-13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
• APCX TW very compact tweeter passive crossover optimised for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.
• 4 Passive crossovers are supplied with “OEM Integration compliant” fast-on connectors. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the required installation time.
  

• 32 mm pure copper voice coil, for high power handling and outstanding low frequency control.
• Water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.
• Reduced mounting depth, providing ease of installation in OEM placements.
• TPU (Thermoplastic Polyurethane) surround, featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.
• Compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive.
• High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature resistant plastic cover, protecting it against accidental short circuits.
• Developed with the KLIPPEL suite. * Grille included
  

• Comp – 2-Way System
• Size – Woofer 130mm (5″), Tweeter 26mm (1″)
• Power Handling – 75 W Continuous Power, 225 W Peak Power
• Impedance – 4 Ω
• Frequency Response – 70 – 20kHz
• Crossover Type – HP @ 3.5kHz – 6dB Oct
• Component Adjustment – +2; 0dB
• Woofer Magnet Size – 85mm (3.55″) x 40mm (1.57″) x 13mm (0.51″)
• Tweeter Magnet Size – 19mm (0.75″) x 13mm (0.12″)
• Weight of one component – Woofer 0.65 Kg (1.43 lb), Tweeter 0.04Kg (0.09 lb)
• Voice coil Ø – Woofer 32mm (1.26″), Tweeter 20mm (0.8″)