Saab 93 95 Car Steering Wheel Interface Stalk Control Adaptor – Manual Cars Only

Description

Steering wheel interface and ISO adapter cable allowing use of original buttons with a new after market head-unit.

This interface allows use of cars original steering wheel buttons with a new audio system or navigation unit.

Suitable For The Following Vehicles:

• Saab – 9-3 mk1 (1998 – 2003)
• Saab – 9-5 mk1 (1997 – 2006)
• with manual gears only

Not suitable for Saab 9-3 (04-06) with Quadlock connector and fibre optics or Saab 9-5 with automatic gears (with paddle shift function).

The Interface consist of two parts; The Steering Wheel Interface and the Car Stereo Patch Lead.

The Patch Lead Supplied  can be used with the following:

• Alpine
• Clarion
• JVC  (headunit with 3.5mm jack or single wire)
• Kenwood
• Panasonic
• Pioneer
• Sony
• Chinese Branded Headunits

For the chinese branded headunit you have to configure the patch lead according to what your head unit requires:

• 2 Wire Resistive Learning
• 3.5mm Jack Learning

This will depend on the headunit type, most chinese brand stereos have 3 wires marked SW1, SW2, GND.  This is the 2 Wire Resistive Learning Type Patch Lead.  Then there are those that uses 3.5mm Jack (headphone) type connection, for this one you need to choose the 3.5mm Jack Learning Patch Lead.

Note: 

We make every effort to make sure that the information provided is correct.  If you are not sure on the suitability of the product, remove the original headunit and compare the original connector in the vehice to the photo to make sure it is the same…….

If you are still note sure, then simply contact our customer services.