Description
New and Updated Universal steering wheel control interface for CAN-Bus & resistive vehicles. Compatible with a wide range of vehicles. Simply connect the relevant CAN-Bus or resistive wires and set the dip-switches according to the vehicle to be installed in. Aftermarket head unit connection lead is sold separately. Now supports phone buttons for selected vehicles
Check to see if your vehicle is compatible here
Instructions for the Steering Control Interface can be found here
Features:
- Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
- Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
- Maintains the original features of the vehicle such as date, time and temperature display
- Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
- One interface, compatible with hundereds of vehicle applications
The steering control adaptor can be used with the following:
- Alpine
- Beat
- Blaupunkt
- Clarion
- JVC (headunit with 3.5mm jack or single wire)
- LG
- Kenwood
- Panasonic
- Pioneer
- Sony
- Zenec
- Chinese Branded Head units
For the chinese branded headunit you have a further choice of 2 Patch Leads,
- 2 Wire Resistive Learning
- 3.5mm Jack Learning
This will depend on the headunit type, most chinese brand stereos have 3 wires marked SW1, SW2, GND. This is the 2 Wire Rsistive Learning Type Patch Lead. Then there are those that uses 3.5mm Jack (headphone) type connection, for this one you need to choose the 3.5mm Jack Learning Patch Lead.
Note:
We make every effort to make sure that the information provided is correct. If you are not sure on the suitability of the product, remove the original headunit and compare the original connector in the vehice to the photo to make sure it is the same…….
If you are still note sure, then simply contact our customer services.
Reviews
There are no reviews yet.