Bose Amplified Car Stereo Steering Wheel Interface Adaptor For Nissan 350z

This Steering Wheel Interface allows you to change the factory original headunit to an aftermarket car stereo whilst maintaining the use of your factory stalk/steering controls.

Compatible with:

Use with Nissan Murano & 350Z cars with Bose Amplifier

• Nissan 350 Z   (2003 – 2010)
• Nissan Murano I   (2005 – 2008)

This interface has phono plugs to connect the low level outputs of the new head-unit directly to the cars amplifier. The steering control wires are found in the smaller connector behind the radio.

The Steering Adaptor will be supplied with a Universal Patch lead that can be used with the following car stereo

• Alpine
• Blaupunkt
• Clarion
• JVC  (headunit with 3.5mm jack or single wire)
• Kenwood
• Pioneer
• Sony

• 2 Wire Resistive Learning
• 3.5mm Jack Learning

This will depend on the headunit type, most chinese brand stereos have 3 wires marked SW1, SW2, GND.  This is the 2 Wire Resistive Learning Type Patch Lead.  Then there are those that uses 3.5mm Jack (headphone) type connection, for this one you need to choose the 3.5mm Jack Learning Patch Lead.

Note: 

We make every effort to make sure that the information provided is correct.  If you are not sure on the suitability of the product, remove the original headunit and compare the original connector in the vehice to the photo to make sure it is the same…….

If you are still note sure, then simply contact our customer services.